Warrior Recumbent Tadpole Trike
17.5MB PDF plan
The
Warrior Racing Trike takes performance and looks to all new heights. With triple disc brakes, under seat steering, and a general racing attitude, the
Warrior would easily pass for an expensive production import. Built using inexpensive bicycle components and steel tubing, the
Warrior weighs in at only 43 pounds, and has perfect handling and braking characteristics. There is not one single machined part on the entire trike, and everything can be built using only a basic welder, hand drill, and angle grinder!
The
Warrior Racing Trike uses commonly available 20mm hubs, so there are no hard to find or overly expensive components needed. The frame is completely made of square steel tubing,and everything else on the
Warrior Trike can be found at bicycle shops or hacked from scrap bicycles. The building process is designed to allow anyone with a Do-It-Yourself desire to finish his or her own version of the
Warrior without requiring previous bike building experience or specialized tools and skills.
If you have been eyeing up those expensive imported recumbent trikes, but think $4,500 is a bit too steep of a price tag, then get out your tools and build it yourself! For thousands of dollars less than the price of a basic tadpole trike, you can create your very own racing trike that will rival many of the factory built machines available.
StreetFox Recumbent Trike
11.7MB PDF plan
The
StreetFox Recumbent Trike is a fast and comfortable version of the classic "tadpole" style trike (two wheels in the front), which includes rear suspension, three wheel braking, and 26 inch rear wheel for optimal gear range. The
StreetFox looks and handles as good as any commercially produced trike, and can be completely made using commonly available and inexpensive bicycle components and some square tubing. Not one single machined part is needed. The
StreetFox has an adjustable bottom bracket so it can fit riders of most heights, from 5 feet to well over 6 feet tall. Due to the rugged construction and use of sturdy 14 mm axle, 48 spoke front wheels, the
StreetFox can easily accommodate riders over 250 pounds.
Because this project only requires a basic welder, an angle grinder and a hand drill, the
StreetFox can be built by anyone with the desire to put a little effort into this rewarding hobby. Because of the simple mono tube main frame, the
StreetFox is highly customizable, allowing the builder to alter the plan to suit his or her own needs, or simply to try new ideas. The most complex part of the trike is obviously the steering, but the
StreetFox uses commonly available and "bullet proof" BMX wheels and hubs, so you don't need to source hard-to-find, expensive front wheel parts. All three wheels have standard bicycle brakes and cables as well, so you can find most of your parts by salvaging old bicycles or at most bicycle stores.
Every step of the build is detailed in high resolution photos, with clear instructions on how to calculate critical angles and lengths based on the parts you have on hand. The final product is a very sleek looking tadpole style trike that looks professionally built and rides like a dream. Enjoying the scenery on a comfortable recumbent trike is like sitting in your favorite chair, but you can always put your ankle to the pedals and get the wind in your hair because the
StreetFox is as fast as it is comfortable.
Viking Recumbent Tandem Trike
21.2MB PDF plan
Note: this is a very large file and probably cannot be downloaded if you have slow, or dial-up Internet service
The Viking is a very unique tandem trike that includes an independent transmission system that allows one rider to stop pedaling without affecting the other. The Viking Tandem Trike uses commonly available 20mm disc brake hubs, so there are no hard-to-find or overly expensive components needed. The frame is completely made of square steel tubing, and everything else on the Viking Trike can be found at bicycle shops or hacked from scrap bicycles.
The building process is designed to allow anyone with a Do-It-Yourself desire to finish his or her own version of the Viking Trike without requiring previous bike building experience or specialized tools and skills.
The plan is laid out in a format that makes customization or alternate parts usage a breeze, so you will certainly be able to include your own imagination in the process of building a recumbent trike.
If you have been eyeing up those expensive imported tandem trikes, but think $8,000 is a bit too steep of a price tag, then get out your tools and build it yourself! For thousands of dollars less than the price of a basic tadpole trike, you can create your very own tandem trike that will rival many of the factory built machines available.
Click
here to take advantage of this special offer.
which would make me start over."
