Thursday, October 14, 2010

Warrior tadpole trike by Tim - Atomic Zombie builders gallery

"Hi Brad. Here's a pic of my Warrior for the gallery. Thank you for the great design. Tim"

Nice job, Tim. Thanks for sharing with the bike building community!

The Warrior Racing Trike takes performance and looks to all new heights. With triple disc brakes, under seat steering, and a general racing attitude, the Warrior would easily pass for an expensive production import. Built using inexpensive bicycle components and steel tubing, the Warrior weighs in at only 43 pounds, and has perfect handling and braking characteristics. There is not one single machined part on the entire trike, and everything can be built using only a basic welder, hand drill, and angle grinder!

The Warrior Racing Trike uses commonly available 20mm hubs, so there are no hard to find or overly expensive components needed. The frame is completely made of square steel tubing,and everything else on the Warrior Trike can be found at bicycle shops or hacked from scrap bicycles. The building process is designed to allow anyone with a Do-It-Yourself desire to finish his or her own version of the Warrior without requiring previous bike building experience or specialized tools and skills. 

If you have been eying up those expensive imported recumbent trikes, but think $4,500 is a bit too steep of a price tag, then get out your tools and build it yourself! For thousands of dollars less than the price of a basic tadpole trike, you can create your very own racing trike that will rival many of the factory built machines available.